FreeBSD net80211 template driver

Introduction

This is a templated implementation of FreeBSD's 15-CURRENT net80211 layer. This driver is intended as a learning resource.

This driver is as much a project for myself as it is for any future readers :)

The driver does not implement PCIe, USB or SDIO layers. Rather, everything is implemented in software.

On a FreeBSD host, run the following:

git clone https://github.com/khanzf/i3e_template_driver
cd i3e_template_driver
make
make load

This should create a i3e0 interface. You can now use this to create a VAP.

To create a wlan0 VAP, run the following command:

ifconfig wlan create wlandev i3e0

This code is licensed under the 2-Clause BSD.

The author of this is code Farhan Khan (farhan@farhan.codes)